当前位置:首页 / TBT/SPS通报 /DUS 2409: 2023, Standard test method for iron in trace quantities using the 1,10 phenanthroline method, Second Edition.

DUS 2409: 2023, Standard test method for iron in trace quantities using the 1,10 phenanthroline method, Second Edition.


Uganda
TBT
2024-06-12
2024-08-11

This Draft Uganda Standard covers the chemical analysis of engine coolant for chloride ion by high-performance ion chromatography (HPIC). Several other common anions found in engine coolant can be determined in one chromatographic analysis by this test method. This test method is applicable to both new and used engine coolant. Coelution of other ions may cause interferences for any of the listed anions. In the case of unfamiliar formulations, identification verification should be performed by either or both fortification and dilution of the sample matrix with the anions of interest. Analysis can be performed directly by this test method without pretreatment, other than dilution, as required by the linear ranges of the equipment.


G/TBT/N/UGA/1946
原文文档   翻译文档

75.080 - Petroleum products in general

27 - MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
3820 - Anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils)

Prevention of deceptive practices and consumer protection (TBT)
Quality requirements (TBT)

MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES (HS code(s): 27); Anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils) (HS code(s): 3820); Petroleum products in general (ICS code(s): 75.080)

lINKS
相关链接