1. US 743:2007, Decorative high gloss paints – SpecificationScope: This Uganda Standard specifies the requirements for two grades of air-drying gloss enamel paints for use on suitably primed and uncoated steel, wood, masonry, hard board, compressed fibre board and similar materials used in the construction and finishing of buildings (24 pages, in English). 2. US 745 – 1:2007 Road and runway marking paints – Specification – Part 1: Single pack solvent borne and water borne paintsScope: This Uganda Standard specifies requirements for conventional solvent-borne and water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (22 pages, in English). 3. US 745-2:2007, Road and runway marking paints – Specification – Part 2: Single pack water borne paintsScope: This Uganda Standard specifies requirements for conventional water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (26 pages, in English).

当前位置：首页 / TBT/SPS通报 /1. US 743:2007, Decorative high gloss paints – SpecificationScope: This Uganda Standard specifies the requirements for two grades of air-drying gloss enamel paints for use on suitably primed and uncoated steel, wood, masonry, hard board, compressed fibre board and similar materials used in the construction and finishing of buildings (24 pages, in English). 2. US 745 – 1:2007 Road and runway marking paints – Specification – Part 1: Single pack solvent borne and water borne paintsScope: This Uganda Standard specifies requirements for conventional solvent-borne and water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (22 pages, in English). 3. US 745-2:2007, Road and runway marking paints – Specification – Part 2: Single pack water borne paintsScope: This Uganda Standard specifies requirements for conventional water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (26 pages, in English).

1. US 743:2007, Decorative high gloss paints – SpecificationScope: This Uganda Standard specifies the requirements for two grades of air-drying gloss enamel paints for use on suitably primed and uncoated steel, wood, masonry, hard board, compressed fibre board and similar materials used in the construction and finishing of buildings (24 pages, in English). 2. US 745 – 1:2007 Road and runway marking paints – Specification – Part 1: Single pack solvent borne and water borne paintsScope: This Uganda Standard specifies requirements for conventional solvent-borne and water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (22 pages, in English). 3. US 745-2:2007, Road and runway marking paints – Specification – Part 2: Single pack water borne paintsScope: This Uganda Standard specifies requirements for conventional water-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours (26 pages, in English).

来源：epingalert 发布时间：2008-04-25 浏览量：*

通告成员：

Uganda

通告类型：

TBT

通告发布时间：

2008-04-25

评议截止时间：

通告描述：

This document lays down the product specifications for decorative paints and road marking paints.

文档编号：

G/TBT/N/UGA/19

查看文档：

原文文档翻译文档

ICS Code：

87.040 - Paints and varnishes

热门文章