Egyptian Standard ES 4821/2015 Sanitary Tap Ware - Single Taps and Combination Taps for Water Supply Systems of Type 1 and type 2 - General Technical Specification (51 pages, in Arabic) to replace its last edition in 2005 and its partial amendment in 2012 that has already been mandated by Ministerial Decree No. 637/2005

来源：epingalert 发布时间：2015-10-16 浏览量：*

通告成员：

Egypt

通告类型：

TBT

通告发布时间：

2015-10-16

评议截止时间：

2015-12-15

通告描述：

<p>This standard specifies: a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in: 1) a supply system of Type 1 ; 2) a supply system of Type 2 (b) the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics of nominal size ½ and ¾ single taps and combination taps; c) test methods to verify the characteristics. d) the tests described in this Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture. This Standard applies to draw-off taps (single taps and combination taps) for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks. Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar]. Figure 2 shows a supply system of Type 2 with a pressure range of (0,01 to 1,0) Mpa [(0,1 to 10) bar]. This Egyptian Standard applies to sanitary draw-off taps of nominal size ½ and ¾ (PN 10). The conditions of use and classifications are given in Table 1  according to this standard.</p><p>Worth mentioning is that this standard complies with EN 200/2008.</p>

文档编号：

G/TBT/N/EGY/110

查看文档：

原文文档翻译文档

通告目的：

Protection of human health or safety (TBT)

热门文章