DUS 2056:2018 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10°C and –35°C Using Cold-Cranking Simulator, First Edition.

来源：epingalert 发布时间：2018-10-17 浏览量：*

通告成员：

Uganda

通告类型：

TBT

通告发布时间：

2018-10-17

评议截止时间：

2018-12-16

通告描述：

This Draft Uganda Standard covers the test method for the laboratory determination of apparent viscosity of engine oils and base stocks by cold cranking simulator (CCS) at temperatures between –10°C and –35°C at shear stresses of approximately 50 000 Pa to 100 000 Pa and shear rates of approximately 105 to 104 s–1 for viscosities of approximately 900 mPa·s to 25 000 mPa·s. The range of an instrument is dependent on the instrument model and software version installed. Apparent Cranking Viscosity results by this method are related to engine-cranking characteristics of engine oils.

文档编号：

G/TBT/N/UGA/950

查看文档：

原文文档翻译文档

ICS Code：

75.100 - Lubricants, industrial oils and related products

HS Code：

3403 - Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations based on lubricants; textile lubricant preparations and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials (excl. preparations containing, as basic constituents, >= 70% petroleum oil or bituminous mineral oil by weight)

通告目的：

Prevention of deceptive practices and consumer protection (TBT)
Harmonization (TBT)

DUS 2056:2018 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10°C and –35°C Using Cold-Cranking Simulator, First Edition.

热门文章