DUS 2377:2021, Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils, First Edition

来源：epingalert 发布时间：2021-10-25 浏览量：*

通告成员：

Uganda

通告类型：

TBT

通告发布时间：

2021-10-25

评议截止时间：

2021-12-24

通告描述：

This Draft Uganda Standard suggests physical, chemical, and toxicological test methods for characterizing hydrocarbon lubricant base oils derived from various refining processes including re-refining used oils and refining crude oil. This guide does not contain limits nor does it purport to cover all tests which could be employed; rather, it represents the first step in better describing important parameters of lubricant base oils affecting lubricant performance and safe handling.

This guide applies only to base oils and not to finished lubricants. Base oils containing detectable levels of esters, animal fats, vegetable oils, or other materials used as, or blended into, lubricants are not covered by this guide. This guide is relevant to base oils composed of hydrocarbons and intended for use in formulating products including automotive and industrial lubricants. Although not intended to cover all base oil viscosity grades, this guide does cover the majority of viscosities that would be used in both automotive and industrial oil formulations. These base oils would typically have a viscosity of approximately 2 mm2/s to 40 mm2/s (cSt) at 100 °C (50 SUS to 3740 SUS at 100 °F).

文档编号：

G/TBT/N/UGA/1478

查看文档：

原文文档翻译文档

ICS Code：

75.100 - Lubricants, industrial oils and related products

HS Code：

381121 - Prepared additives for oil lubricants containing petroleum oil or bituminous mineral oil

通告目的：

Quality requirements (TBT)
Prevention of deceptive practices and consumer protection (TBT)

DUS 2377:2021, Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils, First Edition

热门文章